ELISA wash buffer was developed as a high performance washing solution for use in all ELISA formats. The optimised formulation of pH stabilizers, salts and detergents increases the efficiency of washing stages during ELISA, leading to a reduction in background noise and an increased specific signal.
BUF031C is compatible with all routinely used conjugate components such as HRP, Avidin and Alkaline Phosphatase.
Application
This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visitwww.abdserotec.com/protocols.
Application Name
Yes
No
Not Determined
Suggested Dilution
ELISA
Where this antibody has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the antibody for use in their own system using appropriate negative/positive controls.
Storage
Store at +4oC.
DO NOT FREEZE
This product should be stored undiluted. Should this product contain a precipitate, heat gently until dissolved. Do not boil.
Shelf Life
24 months from date of despatch.
Instructions For Use
1. Dilute the required volume of BUF031C 1:10 with deionised water (1 part BUF031C to 9 parts water) and mix.
2. Use at each ELISA wash step for a total of 2-4 washes. Fill each well with the diluted wash buffer (approximately 400ul), taking care not to submerge the plate as this can cross-contaminate the wells. The buffer may be dispensed manually or by an automated system.
3. Between washes, aspirate or dump the buffer. After the final wash blot the plate on paper towels to remove any excess liquid.